MSDSfmp1

Contronic Devices Inc.

15661 Producer Lane Unit G

Huntington Beach, Ca. 92649

Phone: (714)897-2266

Product Identity.................:

Product Code Numbers......:

DOT Hazard Classification..:

Material Safety Data Sheet

Emergency Phone: (714)891-2828

Date Prepared: April 5, 2001

Prepared By: Robert Nibbe

PC Flex Mask P-1 (Pink)

2030, 2040, 2050

Non-Hazardous.:

Hazardous Ingredients

Ammonia

CAS No.

7664-41-7

OSHA PEL

50 PPM

ACGIH TLV

35 PPM

Other Limits

None

Wgt. %

>0.2%

Notes

-

*Please note the only ingredient in PC Flex Mask with exposure limits is ammonia which arises from the normal breakdown of ammonium hydoxide (>0.2%) used in PC Flex Mask to stabilize the natural latex.

*All components of this product are listed in the TSCA Chemical Substance Registry

Physical State: Thick Liquid

Odor and Appearance: Slight Ammonia Odor / Creamy Green Liquid

Specific Gravity (Water = 1): 1

Solubility In Water: Dilutable (Not Soluble)

VOC (lbs/gl): 0.00

Vapor Pressure (mmHg): 17.5

Vapor Density (Air = 1): 1.00

Evaporation Rate (butyl acetate = 1): No Data Found

Boiling Point: 212 Degrees F (100 Degrees C)

Freezing Point: 32 Degrees F (0 Degrees C)

Flash Point and Method: Not Appicable (TAG) Flammable Limits: LEL: Not Applicable UEL: Not Applicable

Extinguishing Media: Use water, carbon dioxide, foam, or dry chemical type extinguisher

Special Fire Fighting Procedures: Wear fully protective fire gear with self-containing breathing apparatus fully operational.

Unusual Fire or Explosive Hazards: None

Is This Product Stable: Yes.

Incompatibility (Materials to Avoid): None Known.

Will Hazardous polymerization Occur? No.

Conditions To Avoid For Stability: None Known.

Hazardous Decomposition Products: No Data Found.

Condition to Avoid for Polymerization: None Known.

Clean Up Procedure: Soak up spill with sand or absorbant. Place in suitable container for disposal.

Waste Disposal Method: Dispose of spilled product according to Federal, State, and Local Environmental Regulations.

Precautions To Be Taken in Storage & Handling: None.

Other Precautions: None.

Potential Health Effects -

Primary Route of Exposure: Dermal, inhalation, injestion

Eye Contact: Possible Eye Irritation

Inhalation: Possible Respitory Irritation

Skin Contact: Possible Dermal Irritation

Injestion: Possible Intestinal and Stomach Irritation

Aggravated Medical Conditions: No Data Found

Emergency First Aid -

Aquatic Toxicity: No Data Found.

Tumorigenicity: No Data Found

Mutagenicity: No Data Found

Reproductive Toxicity: No Data Found

Carcinogenicity: No Data Found


	Eyes and Skin should be washed with a large amounts of water. If affected by ammonia fumes, expose patient to fresh air. If injested, call a physician.

Ventilation: Adequate Ventilation

Respiratory Protection: Non Normally Required

Eye Protection: None Normally Required

Skin Protection: None Normally Required

Personal Hygiene: Wash Hands with Soap & Water Often

Protective Measures: None Normally Required


	[Welcome] [Tech Data] [Guide] [FAQ'S] [Products] [Contact Us] [MSDS]

This Website was designed and is maintained by GLENARDS WEBDESIGN

Questions, Comments or To Place An Order?

E-mail: Contronic Devices Inc.

Phone: (714)897-2266

Fax: (714)897-6262